MATTHEW

we are out of school today but we are eager to get back to work on our robot, we just got our wheels in and we can now finish the the chasis (H-drive) for our robot.

The Day Has Come

Today was filled with panic as every group struggled to finish their robot in time to earn an A, unfortunately no other group was able to finish on the due date. We spent the day helping other groups finish their robots, and help them finish before the end of the period, Also we were able to finish putting all of our coding on one remote, allowing us to control our whole robot with one controller.

The Juggernaut in it's Virtual Glory!

Iso

Front

Right

Top

Finishing up

Today we are trying to finish our solid works before the due date tomorrow, also we are helping out other groups with their robots so they can finish the challenge on time. Also today Mr. Martin said we have to put all of our coding on one brain, so we have Briston working on that.

"WE ARE THE BEST"

Today we finally finished, we completed the challenge and got 120 percent! We were so happy to be the first group to finish, also we were happy that our robot drove smoothly, our battery didn't die, and our driving was A1!

Shooter Fix

Today we had to make a few changes to our shooter, we had to change our gear ratio, and also change the way we had it mounted on the robot. With the new mount it is way more accurate and shoots way further. Now we are finished with our robot, right as it is finished being mounted.

Elevator Fix

Today we added a second motor on our robot. We put this motor on the other side of our elevator. This makes it easier for our elevator to go up and down, it works a lot faster and smoother. After that we are almost done with our robot!

Guess Who

Guys this is a special moment our very own Nicholas Schwab is actually in contact with the robot rather than his usual position in front of the computer screen. Nick is the mastermind behind the solidworks build of the robot but its nice to see him working in a different environment. That's what this team is capable to do and makes its a good team. Everyone can evenly distribute work in every field of the build.

New Shooter

Today we ran into a problem with our shooter. We fixed the issue of the elevator, but now the elevator goes up and hits the gears on our shooter. Today we are working on raising the gears of the shooter, and changing the design of  the shooter a little bit.

Fresh Start

Today we had to take apart some of our robot because we were running into a few problems, the elevator for our robot was very stiff, it would go up but not back down. So we are working on fixing this issue, we are reconstruction our elevator with different materials.

The angle of the shooter

Today we added a gear on both sides of the robot and the shooter, this gear is used to angle our shooter up and down, giving us a better advantage over shooting the ball in certain circumstances (also it looks cool). Also we are continuing to stay up to date on our solidworks robot, which is at the same stage as our real robot. Keeping everything on the same page makes it very easy to make changes and to add and subtract things we both need and don't need.

Elevator

Today we added a stabilizer to our elevator, it was very loose and weak before, but now that there is a lift on each side it is very stable. Also we finished coding, and building our launcher. We had to fix the gear ratio to make it shoot faster, and be more effective. 

Making Changes

Today we put more supports on our elevator system so it is not wobbly and unstable.Also we are modifying our whole robot because it exceeded the 18 inch rule, We are changing a few pieces out for some smaller pieces that are just as effective, and follow the 18 inch rule.

The Shooter

Today we started to build the shooter in solid works, also we finished coding our PIC remote. We will be using PIC to control half of our robot, and vex for the other half. This makes for smoother operation, and less things for the driver to do at once.

The Backbone

Today we got up to speed with the solid works and robot. Now we are not behind, and everything we make on our robot we can immediately build on the solid works. Today we build the part on our robot to hold our brains, also we built this in solid works.

Finishing up

Today we got lots of tasks done. First we finished our launcher, then Nick started coding our launcher.  We also attached our conveyor and elevator to one another and they tested moving the elevator up and down.  Soon we will start attaching the launcher to the robot.

Checkpoint 1 - Solidworks

The Juggernaut:

No Days Off

Even though we had a day off yesterday we are back at it by attaching the elevator onto the rack and pinion. The elevator is the second to last piece that is left to attach to the robot, the last item is the shooter. Once we attach the elevator we can have a place to hold the balls and compete in the challenge of picking up four wiffle balls onto the robot. Hopefully by next week we have the elevator tested in the field and in mock scenarios.  

School and Solidworks

Today part of the engineering room was transformed into a film set. Several students (including our own Nick, Drew, and Moshe) participated in filming a video that the school plans to submit to an organization created by Steve Jobs to reform American public education.  After ranting about public school curriculums and making answering satirical questions our group focused on the Solidworks robot. Will and Jaret are working on the conveyor and shooter while Nick continues to push through the main robot.

This is a picture of a file of vex parts that comes with solidworks.

Heads Up

Today we tested out the quality and type of backboard we want for the competition and of course we have to test it with style. Henry putting his fingers and face on the line for some experiments with wiffle balls beamed at him. But the real purpose was to see where the ball would hit the backboard and come out.